10 CFR Part 50 of the NRC's
regulations, "Domestic Licensing of Production and Utilization
Facilities," specifies technical information and data to be
provided to the NRC or maintained by applicants and licensees so
that the NRC may make determinations necessary to protect the
health and safety of the public, in accordance with the Act. The
reporting and recordkeeping requirements contained in 10 CFR 50 are
mandatory for the affected licensees and applicants.
The estimated burden for the
Part 50 clearance renewal would have been reduced for almost all
information collection requirements and resulted in an overall
burden decrease. However, during the projected clearance renewal,
NRC expects to receive applications for 19 combined operating
licenses (COLs). While most of the burden for these application
requirements will be captured in the clearance for 10 CFR Part 52,
the seismic analysis required by Appendix S (Section 32 of the
clearance package) is captured in Part 50. Overall, the estimated
burden has increased by .86M hours over the current clearance, an
increase of 16 percent, primarily because of new burdens associated
with 19 new applications for combined operating licenses. The
number of responses has increased from 7,124 to 45,513 because of
the inclusion of responses for automated morning reports from each
power reactor.
$100,850,015
No
No
Uncollected
Uncollected
Uncollected
Uncollected
John Harves 301 415-2252
jch2@nrc.gov
No
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.