Form Standard Form 17 Standard Form 17 Facilities Available for the Construction or Repair of S

Standard Form 17
(Revised 5/2005)

FACILITIES AVAILABLE FOR THE CONSTRUCTION OR REPAIR OF SHIPS
The public reporting burden for this collection of information is estimated to average 4 hours per response, including the time for reviewing instructions, searching existing data sources,
gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this
collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0703-0006). Respondents should be aware that
notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB
control number.

DEPARTMENT OF THE NAVY
(NAVSEASYSCOM)
& MARITIME ADMINISTRATION
Coordinator for Ship Repair
and Conversion (DOD-DOC)

Form Approved
OMB No. 0703-0006
Expires May 31, 2007

DATE

PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ORGANIZATION. RETURN COMPLETED FORM TO THE APPROPRIATE DEPARTMENT OF DEFENSE
OFFICE OR MARITIME ADMINISTRATION.

TO: (Complete departmental address)

SHIPYARD AND ADDRESS

INSTRUCTIONS
Forward original copy to appropriate
Department of Defense Office or Maritime
Administration, Washington, D.C.

BUILDING WAYS (M.L.W.)
NO.
OF
WAY

LAUNCHING
(X one)

DIMENSIONS

MAXIMUM SHIP SIZE
(Ton 2,240 lbs.)

END

LENGTH

LENGTH O.A.

SIDE

WIDTH

BEAM

BASIN

DEPTH

WEIGHT

END

LENGTH

LENGTH O.A.

SIDE

WIDTH

BEAM

BASIN

DEPTH

WEIGHT

END

LENGTH

LENGTH O.A.

SIDE

WIDTH

BEAM

BASIN

DEPTH

WEIGHT

END

LENGTH

LENGTH O.A.

SIDE

WIDTH

BEAM

BASIN

DEPTH

WEIGHT

END

LENGTH

LENGTH O.A.

SIDE

WIDTH

BEAM

BASIN

DEPTH

WEIGHT

END

LENGTH

LENGTH O.A.

SIDE

WIDTH

BEAM

BASIN

DEPTH

WEIGHT

END

LENGTH

LENGTH O.A.

SIDE

WIDTH

BEAM

BASIN

DEPTH

WEIGHT

END

LENGTH

LENGTH O.A.

SIDE

WIDTH

BEAM

BASIN

DEPTH

WEIGHT

END

LENGTH

LENGTH O.A.

SIDE

WIDTH

BEAM

BASIN

DEPTH

WEIGHT

END

LENGTH

LENGTH O.A.

SIDE

WIDTH

BEAM

BASIN

DEPTH

LENGTH OF LAUNCHING RUN

DEPTH OF WATER
OVER
WAY END

AT DROP
OFF

CONDITION
OF WAY

CRANES SERVING WAY
NO.

TYPE (Plus hook height
for bridge cranes)

LIFT CAPACITY
(Std. tons)

WEIGHT

DEPTH OF RUN AT M.L.W.

Merchant Marine Act of 1936, as amended.

TIDAL RANGE (Difference M.L.-M.H.)
PREVIOUS EDITION MAY BE USED.

IS FIRE PROTECTION AVAILABLE ON
BUILDING WAY?
YES
NO

IS SNUBBING NECESSARY?
YES

Reset

NO

Page 1 of 6 Pages

SHIP'S BERTHS (Piers, Wharves, Bulkheads, Mooring Dolphins (M.L.W.))
NO.

LENGTH
(Actual and Usable)

TYPE

WATER DEPTH
INBOARD

OUTBOARD

HEIGHT
OF
DOCK

USE REPAIR
AND/OR
OUTFITTING

SERVICE AVAILABLE
(Use abbreviations of
services and units of
measure notated
under legend)

CRANES SERVING BERTHS, ETC.
NO.

TYPE (Hook height
above M.L.W.)

LIFT CAPACITY
(Std. tons)

ACT.

LIFT

USE.

REACH

ACT.

LIFT

USE.

REACH

ACT.

LIFT

USE.

REACH

ACT.

LIFT

USE.

REACH

ACT.

LIFT

USE.

REACH

ACT.

LIFT

USE.

REACH

ACT.

LIFT

USE.

REACH

ACT.

LIFT

USE.

REACH

DRYDOCKS (Mean HIGH Water) (List building docks under building ways)
DOCK
NO.

MATERIAL CONSTRUCTED
OF - TYPE
FLOATING-(FD); GRAVING-(GD);
MARINE RAILWAY-(MR)

MAXIMUM SHIP SIZE
ACCOMMODATED
LENGTH OA - BEAM

OVERALL

LENGTH
AT COPING (GD);
ON PONTOONS
(FD)

AT KEEL
BLOCKS; ON
CRADLE (MR)

CLEAR WIDTH
AT TOP;
AT KEEL
CRADLE
BLOCKS
(MR)

DEPTH/DRAFT
OVER SILL
(GD)

OVER
FLOOR

OVER KEEL
BLOCKS

LIFTING CAPACITY
(Ton 2,240 lbs.)

LEGEND (Abbreviations of Services)
Fresh water - F.W. - G.P.M. - P.S.I.
Salt water - S.W. - G.P.M. - P.S.I.
Standard Form 17 (Revised 5/2005)

Steam - S - P/HR - P.S.I.
Air
- A - C.F.M. - P.S.I.

Electric power - E-V-AC-AMP
Electric power - E-V-DC-AMP

Fire protection - FP - G.P.M. - P.S.I
Sanitary sewer - SS - Yes or No

Reset

Page 2 of 6 Pages

PRINCIPAL SHOPS AND BUILDINGS
NAME OF SHOP
OR BUILDING

DIMENSIONS OF
SHOP OR BUILDING

MATERIALS PROCESSED
(See Note)

LARGEST EXIT
WIDTH

HEIGHT

WEIGHT OF MATERIAL OR NUMBER
AND SIZE OF UNITS PRODUCED
PER 8 HOURS (See Note)

ALL OTHER SHOPS
(List names and dimensions,
include mold loft, if any)

FABRICATING
PLATE
SHEET METAL
SUBASSEMBLY
CARPENTER
WOODWORKING
BOAT ASSEMBLY
OR MOLDING
MACHINE
ELECTRICAL
ELECTRONIC
PIPE
GALVANIZING
FOUNDRY
RIGGER

NOTE: Indicate materials as steel, aluminum, reinforced plastic, wood, plywood, sheet metal, etc.
SHOP OR YARD CRANES (5 tons or over)
BRIDGE TYPE
CAP.
(Std. tons)

MAX.
SPAN

HEIGHT
OF HOOK

Standard Form 17 (Revised 5/2005)

STATIONARY, RAIL OR MOBILE
AREA/SHOP SERVICED

TYPE

CAP.
(Std. tons)

MAX.
REACH

CAPACITY
AT REACH

BOOM
LENGTH

HEIGHT
HINGE

AREA SERVICED

Reset

HGT. OF HOOK
ABOVE BASE AT
OUT REACH

Page 3 of 6 Pages

MAJOR ITEMS OF MACHINE TOOLS AND EQUIPMENT (List briefly such of the large items as will indicate the
capacities of all important shops in maximum work piece size, e.g., 30' plate bending rolls, 10' plate shears, 400
ton Hydraulic press, 30' plate furnace, engine lathe 36" x 20" b.c., etc.)

STORAGE SPACE (Sq. ft.) FOR COMPONENTS AND MATERIALS (Less
boat storage) (List dimensions for each area, plus type material stored)

RAW STEEL STORAGE (Sq. ft.)

IN USE

WELDING AND ASSEMBLY (Sq. ft.)

ACREAGE LEGALLY CONTROLLED
DEVELOPED (Including TOTAL (Including
in use)
undeveloped)

EXISTING LOCAL ORDINANCES LIMITING PRODUCTIVE USE

LIMITATIONS IMPOSED BY PROPERTY ZONING CLASSIFICATION

YARD LAYOUT - PLEASE FURNISH A PLOT PLAN OF YARD OR PLANT,
IF AVAILABLE.
Standard Form 17 (Revised 5/2005)

Reset

Page 4 of 6 Pages

LOCATION OF PRODUCTION FACILITIES FOR PRODUCTS LISTED IN ITEM 8 OF SF 129

ON WATERFRONT
YES

EMPLOYMENT

CURRENT

CURRENT NO. SHIFTS

NO

MOBILIZATION - SHIFTS

PROJECTS UNDER CONSTRUCTION WHICH WILL ALTER NAVIGATIONAL
RESTRICTIONS (Specify projects and state effect and estimated
completions.)

MANAGEMENT,
ADMINISTRATION
PROFESSIONAL, ENGINEERING
PROFESSIONAL, TECHNICAL
(All others)
PRODUCTION, SKILLED
PRODUCTION, SEMISKILLED
PRODUCTION, UNSKILLED
NONPRODUCTION

TOTAL

0

0

NUMBER OF PRODUCTION PERSONNEL PRESENTLY ENGAGED IN SHIP AND/OR BOAT
).
CONSTRUCTION (
); REPAIR (
APPROXIMATE TOTAL EMPLOYMENT OF ALL AFFILIATED CONCERNS ONLY LISTED IN ITEM 6 OF SF 129
(NOTE: An affiliate is a concern that directly, or indirectly through one or more intermediary controls, or is
controlled by, or is under common control with, the reporting firm. Common ownership of stock by individuals
does not in itself constitute affiliation.)

DESCRIPTION OF TYPES OF WORK NORMALLY SUBCONTRACTED

DISTANCE TO NEAREST RAILROAD CONNECTION DISTANCE TO NEAREST AIRPORT - IDENTIFY

LARGEST CONVEYANCE AVAILABLE AND MAXIMUM DIMENSIONS OF LOAD, FOR OVERLAND TRANSPORTATION OF FINISHED PRODUCTS (Not to exceed limitations imposed by local ordinances)

NAVIGATIONAL RESTRICTIONS (Indicate all at M.L.W.)
MINIMUM CHANNEL TO TIDEWATER
MINIMUM HORIZONTAL AND VERTICAL BRIDGE
CLEARANCES TO TIDEWATER (Identify structures)

LIMITING LOCK DIMENSIONS TO TIDEWATER (Identify locks)

Standard Form 17 (Revised 5/2005)

Reset

Page 5 of 6 Pages

PRODUCTION EXPERIENCE (List at least three of the largest and the most complex ships or boats constructed, indicating (1) date completed, (2) hull length, beam, and molded depth,
(3) type propulsion unit (fully described), (4) horsepower, (5) electrical and/or electronic installation, (6) special piping features, (7) size and tensile strength of plates, if steel, or type hull
material, if other than steel, (8) special annealing, heat treating, or stress relieving problems encountered, if steel, plus, (9) any other important problems resolved.)
(NOTE: If no previous construction experience give detailed description of major conversion or industrial manufacturing work considered comparable to ship or boat construction.)

Standard Form 17 (Revised 5/2005)

Reset

Page 6 of 6 Pages